specification order no. safety model no. dc voltage note.2 rated current current range rated power (max.) ripple & noise (max.) note.3 output setup, rise, hold up time voltage range frequency range efficiency (typ.) ac current input environment inrush current (max.) leakage current(max.) safety standards safety & emc (note. 7) working temp. working humidity storage temp., humidity temp. coefficient vibration mtbf dimension others note packing protection 5v 7.5v 9v 12v 15v 18v 24v 28v 48v gs18e05 gs18e07 gs18e09 gs18e12 gs18e15 gs18e18 gs18e24 gs 18e28 gs18e48 3.0a 2.0a 2.0a 1.50a 1.20a 1.0a 0.75a 0.64a 0.375a 0 ~ 3.0a 0 ~ 2.0a 0 ~2.0a 0 ~ 1.50a 0 ~ 1.20a 0 ~ 1.0a 0 ~ 0.75a 50mvp-p 80mvp-p 80mvp-p 80mvp-p 100mvp-p 150mvp-p 180mvp- p 240mvp-p 240mvp-p voltage tolerance note.4 line regulation note.5 load regulation note.6 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% 90 ~ 264vac 135 ~ 370vdc 47 ~ 63hz 0.5a / 100vac 45a / 230vac 0.25ma / 240vac tuv en60950-1 approved withstand voltage isolation resistance i/p-o/p:4242vdc i/p-o/p:100m ohms / 500vdc / 25 / 70% rh 500khrs min. mil-hdbk-217f(25 ) 0 ~ +50 (refer to "derating curve") 20% ~ 90% rh non-condensing -20 ~ +85 , 10 ~ 95% rh 0.03% / (0 ~ 50 ) 10 ~ 500hz, 2g 10min./1cycle, period for 60min. each along x, y, z axes 79*54*33mm (l*w*h) 210g ; 60pcs / 13.5kg / carton connector plug cable see page2 see page2 15w 15w 18w 18w 18w 18w 18w 18w 0 ~ 0.64a 18w 0 ~ 0.375a 1.all parameters are specified at 230vac input, rated load, 25 70% rh ambi ent. 2.dc voltage: the output voltage set at point measure by plug terminal & 50% lo ad. 3.ripple & noise are measured at 20mhz by using a 12" twisted pair terminated w ith a 0.1uf & 47uf capacitor. 4.tolerance: includes set up tolerance, line regulation, load regul ation. 5.line regulation is measured from low line to high line at rated load. 6.load regulation is measured from 20% to 100% rated load 7.the power supply is considered as an independent unit, but the final equi pment still need to re-confirm that the whole system complies with the emc directives. features : compliance to en55022, en61000-3-2,3 compliance to en61000-4-2,3,4,5,6,8,11, light industry level, c riteria a overload over voltage 110 ~ 150% rated output power protection type : hiccup mode, recovers automatically after fault con dition is removed 105 ~ 135% rated output voltage protection type : clamp by zener diode, output short universal ac input / full range no load power consumption<0.3w erp step2 compliant meet eisa 2007 (energy independence and security act) 2 pole euro plug class power (without earth pin) protections: short circuit / over load / over voltage fully enclosed plastic case led indicator for power on approvals: tuv / cb / ce pass lps 2 years warranty 500ms, 20ms, 50ms/230vac at full load 500ms, 20ms, 15ms/115vac file name:gs18e-spec 2011-06-14 15~18w ac-dc single output wall-mounted type g s 1 8 e s e r i e s 79.5% 82% 83% 85% 85% 85% 86% 86.5% 87% gs18e05-p1j gs18e09-p1j gs18e15-p1j gs18e24-p1j gs18e48 -p1j gs18e07-p1j gs18e12-p1j gs18e18-p1j gs18e28-p1j emc immunity emc emission
name plate power led 38 70 10mm 11 0.5mm mechanical specification derating curve file name:gs18e-spec 2011-06-14 unit:mm ta ( ) load (%) 0 10 20 30 40 70 100 static characteristics input voltage load (%) 0 50 60 70 60 100 260 80 90 100 80 plug assignment standard plug: p1j p/n output p1j center + 33 79 54 g s 1 8 e s e r i e s 50 id 2.1 x od 5.5 c"+" 15~18w ac-dc single output wall-mounted type ul1185 16awg 1230 50mm for 5v~12v ul1185 18awg 1830 50mm for 15v~48v
|
